Local (904) 451-3169 
Jacksonville Painting Contractor
  • Home
  • Contact
    • Careers
  • Services
    • Commercial Painting Contractor
    • Power Washing
    • Home Painting Services
    • Interior Painting Contractor
    • Exterior Painting Contractor
    • Painting Services
    • Jacksonville Wood Repairs
    • Jacksonville Waterproofing
    • Painter For A Day
  • About
    • Green Painter
  • Blog

Wood Repair with Epoxy

5/20/2019

0 Comments

 
  Wood rot or decay is so unsightly and very expensive to fix. Wood rot or decay usually occurs when dry wood is exposed to condensation in places where there isn’t sufficient aeration. This water contact usually occurs through leaky roofs, faulty plumbing, rain leaks, etc. The struggle of fixing wood rot often poses a challenge to people who do not have the budget capacity to hire professionals or the experience to handle it by themselves. However, you may want to take on the task on their own and encounter hiccups in the process and it is for these people that we bring you this step-by-step tutorial on how to do it yourself and still get the professional result. Here are a few steps to take when fixing wood rot using epoxy resin in your home by yourself. 
wood repair
​Success Begins with the Right Wood Repair Tools
Without gainsaying, the first step to repairing wood rot in your home as an amateur is to assemble your tools before commencing other tasks. Gathering your tools before commencing the job helps reduce the possibilities of having to stop halfway through the task to go get wood repair tools in the shop or in the garage. Stopping halfway through the task is something you want to avoid especially when there are procedures which you need to follow successively, and which may be distorted if you pause. Some of the important tools to gather are; epoxy resin, wood hardener and filler, paintbrush, putty knife, sanding block, rasp, wood chisel, utility knife, polyester filler and 100 grit. In addition, a shop vac will be an asset for clean-up.
​Apply the Wood Hardener and Filler
Prior to the application of wood hardener and filler, first remove the rotten area of the wood with a sharp tool in order to stop the spread of the rot to the new areas of the wood which would be the foundation for the wood repair. After that, cover the area with the wood hardener and apply the mixed polyester wood filler into the corners and crevices using a putty knife. If you are on a tight budget, you can opt for the Bondo wood filler or some other product of wood filler or two-part auto body epoxy which are also guaranteed to work well. 
Door Jamb Repair
​Apply the Epoxy Resin Filler
Using epoxy resin as an alternative for new wood repairs is a great idea. This would save you reasonably on the cost for procuring wood and save you the stress of having to replace the wood. You can select from a wide range of options of epoxy variants for filling rotting spots on wooden platforms. The epoxy resin product comes in a liquid form which eventually hardens when it dries. Epoxy adhesion is compatible to almost anything including wood, however, it is advisable to use it only on surfaces of rotted or rotten wood that is not necessarily hanging. This is because the epoxy can ooze out from a hanging wood like a door. When this filling has been applied, the surface should be allowed to dry in a temperate and dry environment. Also remember to protect your hands with Nitrite Rubber gloves when applying the Epoxy resin filling. 
​Priming the Wood Repair
After patching your rotted wood repair you’ll want to final finish it off like a pro. First, sand the wood patch smooth. Use the look AND feel to blend the wood repair. Next, make sure the area is clean and dust free before beginning the primer application. This wood repair is considered a “hot patch”, primer is a must. Make sure to use the appropriate wood repair primer.
Finishing the Wood Repair
After sanding and cleaning the wood repair a good latex acrylic paint works well. In most cases wood repairs will require 2 coats of finish paint. With the finish coats you will be able to blend the repair with surrounding areas.

Author

To have your wood repaired by the Pros, or painting & waterproofing after the repairs.
Reach out to us and call today for your free quote! 904-451-3169

0 Comments



Leave a Reply.

    Author

    Pro Color Painting is a top-rated Jacksonville, FL painting contractor. Offering painting and water-proofing in Florida for over 28 years.

    Tags
     Interior Painting | Exterior Painting | Waterproofing | Commercial Painting | Painting Services

    All

    Archives

    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    April 2018
    March 2018
    February 2018
    December 2017
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017

    RSS Feed

    Free Quotes

Submit

© Copyright 2021 | Pro Color Painting | All Rights Reserved